Water heater = occupancy truth. New Pi package campsite_presence.yaml:
rv_occupied + phones_on_campsite_wifi template sensors (wifi one stays
unavailable until the MikroTik integration lands — load-bearing for the
dead-man trigger), MQTT bridging home, a local notify-only dead-man
(heater on, no phones on WiFi 3h), and disabled pre-staged lot-light
automations for the future shed Shelly.
dsi_fault_alert.yaml gains the Octavia MQTT relay (campsite/octavia/say)
so home HA — which has no file access — can speak through the verified
webhook path.
Home-side (UI-managed, not in repo): quick failsafe (both out of the
enlarged 150m campsite zone 25 min → fans/lights off + summary ping) and
heater failsafe (2h → heater off with bridge round-trip confirmation).
Both verified live; fan states snapshot-restored after the test.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The alert package looked deployed but the rest_command domain was never
set up — reload_all only reloads already-loaded integrations, so all
four "verified" test fires died with Action-not-found while
check_config said valid. Needs one full core restart on first deploy;
header now says so and gives the verification command.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The Gatus webhook delivered to a channel nobody reads; the secret on the
Pi now holds the confirmed server-alerts webhook (URL stays out of the
repo as before).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
New Pi package (repo copy canbus/ha/dsi_fault_alert.yaml): when the CAN
node's DSI-lockout binary sensor holds 'on' for 10s, fire the server-
alerts Discord webhook (@here, appropriately rude), with a cleared
message when it recovers. Webhook URL lives in the Pi's HA secrets.yaml
(!secret discord_server_alerts_webhook), not the repo.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The campsite HAOS Pi now runs the ESPHome CAN node natively ("OneControl
CAN", *.onecontrol_can_*); the BLE integration is fully torn out (config
entry, custom_components on the Pi, stale MQTT registry orphans) and the
camper dashboard rewritten — water-pump tile dropped on purpose (pump is
panel-only), awning + fault sensors added.
New canbus/ha/mqtt_bridge_onecontrol.yaml (deployed to the Pi as
packages/mqtt_bridge.yaml) bridges the CAN entities to the home broker
via MQTT Discovery, same pattern as the gazebo bridge. Kept the old
unique_ids so home entity ids and recorder history carried over; added
an availability topic and explicit command-topic allowlists (3 switches
+ awning — a future debug entity must not become remotely controllable
for free). Round-trip verified from home HA.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
wesandClaude Fable 5